Corrosion resistant steel pipe is a kind of steel pipe, so in storage must be done neatly and put in a dry environment.
1) the principle of anti-corrosion steel pipe stacking requirements is to ensure the stability of palletizing, under the premise of safety, to do according to species, specifications palletizing, different varieties of materials should be palletized separately to prevent muddling and mutual erosion.
2) prohibit the storage of corrosion-resistant steel pipe around the pile of steel has an erosive effect on the items.
3) the bottom of the pile of anti-corrosion steel pipe should be high, firm and level to prevent the material from moisture or deformation.
Standard anti-corrosion steel pipe stacking method
4) the same materials are stacked separately according to the order of storage.
5) open storage of corrosion resistant steel pipe sections, the following must have a wooden mat or stone, slightly inclined pallets to facilitate drainage, and pay attention to the material placed straight, to prevent bending deformation.
6) anti-corrosion steel pipe stacking height, manual work of no more than 1.2m, mechanical work of no more than 1.5m, stack width of no more than 2.5m.
7) there should be a certain channel between the pile and the stack, the inspection channel is generally O.5m, access to the channel depends on the size of the material and transport machinery, generally 1.5 ~ 2.0m.
8) Angle and channel steel should be stacked in the open air, i.e., the mouth should face down, I-beam should be placed upright, and the I-slot side of the steel should not face up, so as not to accumulate water and rust.
9) The bottom of the stack is padded, if the warehouse for the sunny cement ground, padded O.1m can be; if the mud, must be padded O.2 ~ 0.5m. If the open field, cement ground padded O-3 ~ O-5m, sand and mud surface padded 0.5 ~ O.7m.